Henna Club Indonesia: Henna/Mehndi Craft On Candle

Tuesday, October 3, 2017

Henna/Mehndi Craft On Candle

Yg diperlukan :
Candle / Lilin
A mehndi/henna cone
Small container / Wadah kecil
A paint brush / kuas lukis
Water / Air
Glue-you need to use a glue which would turn transparent when it's dry /
Lem yg berubah transparant saat kering,
bs pakai Glue n Glossy (tersedia di Online Shop Henna Club Indo)

Step 1
Make henna design on candle using mehndi/henna cone as shown in the picture and keep it to dry for a hour o two.

ID--Buatlah desain henna di lilin menggunakan mehndi/henna cone spt di gbr, keringkan selama 1-2 jam atau sampai kering.

Step 2
Mixing the glue,
When the henna on the candle is dry.in a small container,take some glue with little amount of water.don't make it too watery,it should be a thick mixture of water n glue.

ID--Saat henna pada lilin telah kering, buatlah campuran lem dan sedikit air dlm wadah kecil,
jangan terlalu encer, hendaknya berupa campuran kental antara air dan lem.

Step 3
First coat of glue,
apply the mixture on the henna with a paint brush.don't apply it in a up and down movement.just keep drops of mixture on henna,and it will absorb.apply it only on the henna on the candle.as shown in the pic and let it dry.keep it on a piece of paper to avoid glue dripping on your work top.

ID--Lapisan lem pertama,
Aplikasikan campuran lem tadi ke atas desain henna dengan menggunakan kuas lukis,
jangan disapukan ke atas dan bawah, cukup teteskan campuran ke atas desain henna, dan biarkan menyerap, lakukan pada desain henna saja spt di gbr, dan biarkan kering, diamkan diatas kertas.

Step 4
Second coat of glue.
when the first coat of glue dries,apply another glue coat over it.and let it dry for about 3
hours.

ID--Lapisan lem kedua,
setelah lapisan lem pertama kering, aplikasikan lagi lapisan kedua, biarkan kering selama 3 jam.